Home

Tempco's Solid State Variable Power Controllers are an excellent value for your power controlling needs. Used in an open loop, non-feedback control system, these power controllers regulate input versus output voltage for controlling any of a number of processes where a fixed applied voltage is desired. The solid state technology allows these controllers to be smaller and lighter than ever, and useful in areas where variable voltage transformers are not a viable choice.

Typical Applications
Heaters---Injection and Blow MoldingMachine Nozzle Heaters
Hot-Runner Mold CartridgeOther resistive loads
Motor speed controlPlaten Heaters

Surface Panel Mount 10 Amp Unit

Design Features

2400 Watts @ 240 Volts

Compact 2-1/2" Cube Size

One Hole Mounting

Two-Wire Termination

High Thermal Efficiency

Environmentally Protected

Catalog Number: 120V SRS00010
240V SRS00020

Specifications

Input Voltage: 120/240V AC, single phase, 60 Hz
Current Rating: 10 Amps @ 75°C
Maximum Load: 120V-1200 Watts/240V-2400 Watts
Output Voltage: 120V=0 to 118V/240V=0 to 238V
Operating Temp. Range: -40°C to +80°C
Dielectric Insulation: 1600 Volts RMS @ 80°C for 1 min.
Control Mode: Phase Angle

Recess Mount with Remote Knob 25 Amp Unit

Design Features
Solid State Circuit
Modified Transient Suppression
Aluminum Heat Sink
Knob and Dial Plate

Catalog Number: SRS00030

Specifications

Input Voltage: 120V and 240V, single phase, 50/60 Hz
Current Rating: 25 Amps (maximum)
Power Consumption: 50 Watts (maximum)
Maximum Load: 100V-2500W, 240V-6000W
Output Voltage: Adjustable from 1% to 98% of applied voltage
Maximum Temperature: 167°F (75°C) @ base plate center

How To Order

Solid State Variable Power Controllers

Choose the Part Number of the power controller that best
suits the needs of your application.

Please contact Tempco for further assistance.

Toll Free (888) 268-6396