Tempco Logo

TEMPCO Electric Heater Corporation
Instrumentation

Home | Product Lines | Instrumentation Hub | Kits & Accessories

Melt Pressure Display & Alarm Indicators for Extrusion

Series 772 Features | Series 882 Features | Series 992 Features | Specifications | How to Order

Series 772 Melt Pressure Indicator


Model Number: PDA05010		 Design Features
  • 1/8 DIN Size Front Panel
  • 2 Alarms, Programmable Relay Outputs
  • ISO 9001 Certified, CE Approved
  • Economically Priced
  • 4-Digit LED Display for Pressure
  • 3 Keys for Programming
  • Touch-Type Keypad
  • Easy to Calibrate with Sensitivity Auto Ranging
  • Built-In Strain Gauge Bridge Excitation – 10Vdc
  • Filter for Digit Stabilization
  • Coded Access for User Lockout
Series 882 Melt Pressure Indicator


Model Number: PDA05020		 Design Features
  • 1/4 DIN Size Front Panel
  • NEMA 4X - IP65 Front Panel Protection
  • 10-point Red LED Bar Graph
  • ISO 9001 Certified, CE Approved
  • 2 Alarms, Programmable Relay Outputs
  • Calibration Output
  • Retransmission – Programmable for 0 - Vdc, 0 - 20 or 4 - 20mA
  • Multiple Programming Levels with Coded Access
  • Peak Value Memory
  • 4-Key Touch-Type Keypad
  • Built-In Strain Gauge Bridge Excitation – 10Vdc
  • Filter for Digit Stabilization
  • RS-232 & RS-485 Communication Available; Consult Factory for More Information
Series 992 Melt Pressure  and Temperature Indicator


Model Number: PDA05030		 Design Features
  • 1/4 DIN Size Front Panel
  • NEMA 4X - IP65 Front Panel Protection
  • 10-point Red LED Bar Graph
  • ISO 9001 Certified, CE Approved
  • 2 Alarms, Programmable Relay Outputs
  • Calibration Output
  • Retransmission – Programmable for 0 - Vdc, 0 - 20 or 4 - 20mA
  • Multiple Programming Levels with Coded Access
  • Peak Value Memory
  • 4-Key Touch-Type Keypad
  • Built-In Strain Gauge Bridge Excitation – 10Vdc
  • Filter for Digit Stabilization
  • RS-232 & RS-485 Communication Available; Consult Factory for More Information
Specifications
Part Number 772 Series - 1/8 DIN
PDA05010		 882 Series - 1/4 DIN
PDA05020		 992 Series - 1/4 DIN
PDA05030
Electrical
Power 120 Vac ±10% or 230 Vac ±10% (50/60 Hz)
Optional: 11-27 Vac/Vdc for PDA05010 and 20-27 Vac/Vdc for PDA05020/PDA05030
Operating Temp. +32°F to +130°F (0° to 55°C)
Noise Immunity: VDE 0843 & IEC 801
Fascia Seal Rating: N/A NEMA 4X – IP65
Termination: Screw clamp terminals
Signal Input
Type: 350 Ω strain gauge bridge
Input Sensitivity: 3.3 mV/V 1.5 to 7.5 mV/V
Accuracy: ±0.2% of full scale ±1 digit
Sensor Excitation: 10 Vdc @ 120 mA
Calibration: Will accept transducers with internal shunt calibration values
from 40%–100% or external calibration resistors
Housing 1/8 DIN (48 × 96 × 160 mm) 1/4 DIN (96 × 96 × 160 mm)
Panel Cutout 1.75 × 3.62 in.
(44.5 × 92 mm)		 3.62 × 3.62 in. (92 × 92 mm)
Display
Type: 4-digit LED display Two 4-digit LED displays
Red: Pressure
Green: Temperature
Ranges: User programmable:  –999 to +9999 Pressure: –999 to +9999
Temp.: Standard T/C limits
Units: PSI, kg/cm2, BAR, kPa, Pa, MPa  PSI, kg/cm2, BAR, °F, °C
Decimal: Selectable from keyboard
Set-Up Prompts: Displays program steps and error conditions
Alarms
Type: 2 SPDT: In the event of a power failure relays go into alarm condition
Mode: Absolute, relative with direct or inverse functions can be set via front panel keyboard
Set Point Range: 0-100% full scale
Hysteresis: Configurable per output
Contact Rating: 5A @ 250 Vac for each alarm output
Auxiliary Output
Retransmission: N/A 0-10 Vdc or 0/4-20ma
Resolution: N/A 4000 steps
Isolation: N/A 1500V
How To Order
Order by the part number of the display that meets your requirements.

Standard lead time is stock to 3 weeks.